
Underground mining machines. Solid as a rock.
Loaders, dump trucks, drills, bolters and scalers from GHH, now part of Komatsu. Built in Gelsenkirchen, supported worldwide.
Talk to our team +49 209 38907 0
- Building underground machines since
- 1964
- Part of Komatsu
- July 2024
- Service and parts support
- 24/7
- Parts warehouses: DE, IN, MX, ZA
- 4
Part of KomatsuAcquisition completed 1 July 2024- Red Dot Award 2020Product design, MK-42 dump truck
- Good Design Award 2021MK-42 dump truck
- ISO 9001 · 14001 · 18001Quality, environment, safety (GHH Mining Machines)
- CE markedEuropean conformity on machines built in South Africa
- EU Stage VOptional across almost the entire range
Roots in the Ruhr since 1782. Machines in mines today.
1782
Ironworks origins. The Ruhr area grew around this company.
500+
Softrock units delivered by our BAT team.
45 t
Payload in our dump truck range, from 20 t.
4
Spare parts warehouses: Germany, India, Mexico, South Africa.
Machines for every face and every heading
One manufacturer for loading, hauling, drilling, bolting and securing. Tell us your application and we configure the machine around it.
Loaders and trucksLHDs from narrow vein to heavy duty classes and underground dump trucks up to 45 t, diesel or electric.
Drills and boltersFace drills, production drills and roof bolters, in Komatsu and Mine Master design.
ScalersSafety vehicles that secure roof and walls in softrock and potash mines.
Utility vehiclesShotcrete units, personnel carriers, light cranes and low profile utility vehicles.
GHH inSiTEFleet data and management tools on desktop and mobile.
Rock tools and resinDrill bits for underground and quarrying work, resin capsules for ground consolidation.Not sure which machine fits your site?
Send us shaft size, rock type and target tonnage. An engineer answers with a proposal.
Talk to an engineer
In the field
Machines, launches and partners from the last years, with the source for each.
01
Potash mine, Germany
K+S Zielitz: cable and battery LHD trial
K+S trials the GHH LF-19EB at its Zielitz potash mine. It runs on a trailing cable and an onboard lithium-ion battery, handles gradients up to 28% and moves between production ends without a generator.
Source: International Mining (opens in a new tab)
02
Launch in Gelsenkirchen, 24 October 2022
LF-10 NEO: the new 10 t loader
Presented at the GHH factory with test drives and a VR session. Maximum tipping height of 2.5 m, the highest in its class, built to load 30 t trucks.
Source: International Mining (opens in a new tab)
03
Agreement signed February 2024
Türkiye: Marubeni as GHH dealer
Marubeni Dağıtım ve Servis sells and services GHH loaders, trucks and utility vehicles in Türkiye. Its network spans six locations and 50 sales and service centres.
Source: Global Mining Review (opens in a new tab)

Safety and technology you can specify
Built for your site
Every machine is designed around your shaft dimensions, rock and application. We even deliver machines dismantled for slinging down the shaft and assemble them on site.
Safer and cleaner
EU Stage V engines across almost the whole range, battery electric options, biodegradable oils, proximity detection interface and ergonomic cabins.
Supported for life
From start up to decommissioning: service contracts, 24/7 field service, rebuilds, retrofits and operator training.
Backed by Komatsu
GHH is now part of Komatsu, with factories and rebuild facilities in Europe, Southern Africa, India and Chile.
A machine on breakdown does not make money
So we keep it running: parts from stock, technicians on call and training that stays on site.
Spare parts hotline
+49 209 38907 316spares@ghh-fahrzeuge.deService requests: service@ghh-fahrzeuge.de



Spare parts
Original parts from our central warehouse in Gelsenkirchen and regional warehouses in India, Mexico and South Africa. The eDokS catalogue shows every major component.
Field service and rebuilds
Routine service, inspections, retrofits and machine rebuilds, on site or in our workshops.
Training
E-learning, blended learning, classroom and on the job training for service technicians and operators.
Consulting and financing
Engineering support for your project and financing solutions that fit your investment.
Built over centuries, not quarters

1782
The Gutehoffnungshütte ironworks starts operating in Oberhausen.
1873
Founded as a share association for mining and steelworks operations.
1995
The mining and tunnelling vehicle division becomes GHH Fahrzeuge GmbH.
2004
Joint venture GHH Mining Machines in South Africa. Head office in Gelsenkirchen since 2005.
2006
Partnership with Mine Master in Poland adds drills, bolters and production rigs.
2024
Komatsu completes the acquisition of GHH Group.
A network that reaches every mine
- Gelsenkirchen, Germany
- Boksburg, South Africa
- Zimbabwe
- Botswana
- India
- Chile
- Mexico
- Türkiye
- KomatsuParent company since 2024
- Mine MasterDrilling and bolting equipment, Poland
- GHH Mining MachinesLocal manufacturing, Boksburg, South Africa
- BATSpecialised softrock equipment
- MarubeniDealer in Türkiye
- OverprimePartner, Peru
- TitanPartner, Turkey
- UVBPartner, Botswana
- TemboLight duty electric vehicles, Netherlands

2024
GHH joins forces with Komatsu
The acquisition of GHH Group by Komatsu opens new doors for our people and our products.

2024
GHH and Marubeni partner in Türkiye
A stronger consulting, sales and service network for GHH machines in Türkiye and beyond.

Oct 2022
LF-10 NEO launch day
Test drives, a VR world and a first look at automation options at the GHH factory.

Build the machines that go underground
Join Komatsu and GHH in Gelsenkirchen. We hire technicians, mechatronics engineers and logistics specialists. Postings are in German.
- Commissioning technician, underground mining vehicles
- Service technician
- Electronics technician and mechatronics engineer
- Industrial mechanic
- Warehouse logistics specialist
- Welding specialist (QS)
Questions buyers ask
Who builds GHH machines today?
GHH designs and manufactures loaders, dump trucks and scalers in Gelsenkirchen, Germany, and low profile and narrow vein loaders in Boksburg, South Africa. GHH has been part of Komatsu since July 2024.
Which machines does GHH offer?
Load haul dumpers (LHDs) from narrow vein to heavy duty classes, underground dump trucks up to 45 t, scalers, face and production drills, roof bolters and utility vehicles for hard rock, soft rock and tunnelling.
Can machines be built to my specification?
Yes. GHH designs machines around your application, rock and shaft dimensions. If a vehicle does not fit the shaft, we deliver it dismantled and assemble it on site.
Do you offer electric and low emission machines?
Yes. Most of the range is available with EU Stage V engines. Battery electric options include the LF-19EB and SLP-14E.
How do I order spare parts?
Call +49 209 38907 316 or write to spares@ghh-fahrzeuge.de. Parts ship from Gelsenkirchen or from warehouses in India, Mexico and South Africa.
Do you offer service contracts and training?
Yes. Long term service contracts, breakdown field service, rebuilds and training for technicians and operators are part of the offer.
Tell us about your project
Shaft size, rock, target tonnage or the part number you need. We answer with a concrete proposal.
- Phone+49 209 38907 0
- Sales+49 209 38907 414Machine sales, Gelsenkirchen
- E-mailinfo@ghhrocks.com
- Spare parts+49 209 38907 316
- VisitGHH Group GmbH
Emscherstr. 53, 45891 Gelsenkirchen, Germany